Functioning in a contained bracket,a vave spring loads the gear with light ,yet accurate force allowing axial movement.The gear shown in this application self-aligns with its mating gear during operation.
Rotary Union Application
This application incorporates both a single-tren and a wave spring.The union cross section of the wave spring allows it to be installed in the assembly without interfering with mating components. The single turn wave spring takes up play and reduces vibration in a bearing preload capacity.The force of the wave spring ,when compressed ,helps create a seal to prevent fluid from flowing from the high pressure to the low pressure side of the union.
Water valve Application
A wave spring also known as a flat wire compression spring,prevents the valve handle from rotating by maintaining aconstant load and engaging the threads on the main shaft.As the handle rotates counter-clockwise,wave spring resistance in creases and rotation is less likely.
Pressure Relief valve Application
An exact pressure is accomplished using awave spring. Air pressure under the assembly causes the spring load to increase,forcing the plate away from the sealing surface providing the pressure relief mechanism. When the load against the spring decreases, allowing the unit to seal once again.
Valve Application
When compressed air is forced through the valve, the wave spring compresses to accurately maintain a force that will precisely regulate the flow from the valve.
Flow Valve Application
As the fluid pressure increases the wave spring precisely controls the linear displacement of the piston,which positions the orifice for proper fluid flow.
Vibration Isolator Application
Under consant loading ,the isolator dampens vibration from equipment operation.Wavo springs are used to provide the precise and predictable load/deflection curves.
Axia PistonPump Application
A wavo spring was specified to provide a higher preload to the tapered roller bearings. The wavo spring was chosen since the force needed was greater than offered with a stock wave spring.
Clutch Drive Applicaiton
Pressure on the round belt is produced by com-pressing the wavo wave spring through the sheave halves.The toop threaded cap rotates to adjust the wavo compression.
Face Seal Application
The wave spring appliespressure to precisely load the carbon face against a mating surface,properly sealing fluids.The wave spring operates over a fixed working range and provides an exact force.The wave spring replaces a stamped wavey washer that was unable maintain the necessary spring rate.The exact pressure of the carbon face against the sealing surface provided by the wave spring is essential to avoid excessive wear, yet maintain a proper seal.
Need customized products? MASCOT technology can customize your products according to the needs of all your projects. If you have any opinions and suggestions or are willing to cooperate with us to achieve a win-win situation, please contact us as soon as possible.
